Press Brake Machines

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

 

 

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

 

 

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

 

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Siddhapura Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. Siddhapura Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallelism between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Dowty, Yuken, Polyhedron etc.

Capacities rated for M.S. (U.T.S. 45kg/mm2 Yield 28kg/mm2). Bending capacities stated are only representative and not binding. Allow extra capacity for material inconsistencies, bending conditions. Right to change specification, features without notice reserved. Compliance with safety requirements as per local regulations is responsibility of the user.

Features:

• Electric Motor
• Control Panel with Selection INCH – ONCE – AUTO Mode of operation
• Foot switch
• Fine stroke adjustment rod with limit switches
• Manual Lubrication
• Manual Back Gauge
• Standard V Block & Punch
• Instruction Manual

Option:

• Goose Neck Punch & Special Tooling (as per customer’s drawing)
• Electronic Stroke Counter
• DRO for Back Gauge
• NC/CNC Operated Back Gauge
• Motorized Automatic Lubrication System
• All Dimensions are in mm.

Details:

• Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
• As day to day improvements are contemplate for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
• All the machines undergo a thorough check × up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
• Electricals are not under warranty.

Product Details:

Details:

• Ergonomic user friendly Pendant & Mobile Control Operating Console with Cybelec / Delem CNC Operating System.
• High quality and repetitive bending is obtained by using of Hydro-Electrical Technique with Synchronized Working Cylinders VI, 12 & Servo Valves, these will give you the best bending result with its perfect repeatability ratio.
• CNC Operated Analog Dynamic & Fast Servo Controlled Precision Backgauge system with strong construction ensures an efficient operation for X, R & Z-Axis with Servo Motor, HIWIN OR Equitant Ball Screws & Linear Guide System with an accuracy of 0.01.
• Synchronization control of YI+Y2 axis provided by linear encoders within 0.01 mm tolerances.
• CNC Dynamic-Hydraulic Anti Deflection System can automatically control the table deflection compensation yielding uniform length of all work piece angles that communicates with the CNC Controller, performs crowning automatically and ensuring that the bended part is at every point and at equal bend angles.
• SIDDHAPURA / IMPORTED Top and Bottom Tool are long lasting stiffened and provide precise bending.
• Quick Release Promecam type Top Tool Clamping System which provides easy to change & fastest quick tool change operationally by single  lever operated.
• Sliding Front Sheet Support Arms with the help of linear guide rail and bearing.
• BOSCH-REXROTH / HOERBIGER servo hydraulic system with proportional valve & Silent high pressure pump.
• Covers for Cylinders, Top Beam & Side Guards.
• All SIDDHAPURA machines are designed using 2D & 3D programming and made with enhanced high tensile 152062 quality steel with the latest high-frequency with modern aesthetic concept responding hydraulic control technology.
• Front Cylinders design with PU imported Seals.
• Cylinders are machined with 0.001 mm precision and pistons are especially hard chrome.
• Electrical Panel with cooling system designed to meet CE standards.
• 6 Axis Back gauge (X1, X2, R1, R2, 21, 22)
• Cybelec / Delem delegated 2D & 3D controller with offline software available on request.
• Special Tooling available.

Product Details:

Details:

• Ergonomic user friendly Pendant & Mobile Control Operating Console with Cybelec / Delem CNC Operating System.
• High quality and repetitive bending is obtained by using of Hydro-Electrical Technique with Synchronized Working Cylinders VI, 12 & Servo Valves, these will give you the best bending result with its perfect repeatability ratio.
• CNC Operated Analog Dynamic & Fast Servo Controlled Precision Backgauge system with strong construction ensures an efficient operation for X, R & Z-Axis with Servo Motor, HIWIN OR Equitant Ball Screws & Linear Guide System with an accuracy of 0.01.
• Synchronization control of YI+Y2 axis provided by linear encoders within 0.01 mm tolerances.
• CNC Dynamic-Hydraulic Anti Deflection System can automatically control the table deflection compensation yielding uniform length of all work piece angles that communicates with the CNC Controller, performs crowning automatically and ensuring that the bended part is at every point and at equal bend angles.
• SIDDHAPURA / IMPORTED Top and Bottom Tool are long lasting stiffened and provide precise bending.
• Quick Release Promecam type Top Tool Clamping System which provides easy to change & fastest quick tool change operationally by single  lever operated.
• Sliding Front Sheet Support Arms with the help of linear guide rail and bearing.
• BOSCH-REXROTH / HOERBIGER servo hydraulic system with proportional valve & Silent high pressure pump.
• Covers for Cylinders, Top Beam & Side Guards.
• All SIDDHAPURA machines are designed using 2D & 3D programming and made with enhanced high tensile 152062 quality steel with the latest high-frequency with modern aesthetic concept responding hydraulic control technology.
• Front Cylinders design with PU imported Seals.
• Cylinders are machined with 0.001 mm precision and pistons are especially hard chrome.
• Electrical Panel with cooling system designed to meet CE standards.
• 6 Axis Back gauge (X1, X2, R1, R2, 21, 22)
• Cybelec / Delem delegated 2D & 3D controller with offline software available on request.
• Special Tooling available.

Available:

• Single: Length – 4000 to 14200 mm | Capacity – 400 to 1500 Ton
• Tandem: Length – 4000 to 32400 mm | Capacity – 400 to 12000 Ton

Product Details:

Details:

• Ergonomic user friendly Pendant & Mobile Control Operating Console with Cybelec / Delen CNC Operating System
• High quality and repetitive bending is obtained by using of Hydro-Electrical Technique with Synchronized Working Cylinders 1.72 Serve Valves, these will give you the best bending result with its perfect repeatability ratio.
• CNC Operated Analog Dynamic & Fast Servo Controlled Precision Backgauge system with strong construction ensures an efficient operation for X, R&Z-Ants with Servo Motor HIWIN OR equivalent Ball Screws & Linear Guide System with an accuracy of 0.01
• Synchronization control of Y1+12 axis provided by linear encoders within 0.01 mm tolerances.
• CNC Motorized Crowning System can automatically control the table deflection compensation yielding uniform length of all work piece angles, that communicates with the CNC Controller, performs crowning automatically and ensuring that the bended parts at every paint and at equal bend angles.
• SIDDHAPURA / IMPORTED Top and Bottom Tool are long lasting stiffened and provide precise bending.
• Quick Release Promecan type Top Tool Clamping System which provides easy to change fastest quick tool change operationally by single lever  operated.
• Sliding Front Sheet Support Arms with the help of linear guide rail and bearing.
• BOSCH-REXROTH / HAME servo hydraulic system with proportional valve & Silent high pressure pump
• Covers for Cylinders. Tap Beam & Side Guards.
• All SIDHAPURA machines are designed using 20 & 30 programming and made with enhanced    high tensile 152002 quality steel with the latest high-frequency with  modern aesthetic concept responding hydraulic control technology
• Front Cylinders design with PU imported Seals.
• Cylinders are machined with 0.001 mm precision and pistons are especially hard chrome.
• Electrical Panel with cooling system designed to meet CE standards
• 6Axis Backgauge 1,x2,  R1, R2,21,22
• Cybelec / Delem delegated 2D & 3D controller with offilne software available on request

Available:

• Single : Length – 3100 to 6200 mm | Capacity – 110 to 150 Ton
• Tandem : Length – 4000 to 12400 mm | Capacity – 150 to 900 Ton

Product Details:

Details:

• Ergonomic user friendly Pendant & Mobile Control Operating Console with Esa / Cybelec CNC Operating System.
• High quality and repetitive bending is obtained by using of Hydro-Electrical Technique with Synchronized Working Cylinders Y1, 82 & Servo Valves; these will give you the best bending result with its perfect repeatability ratio.
• Synchronization control of Y1+82 axis provided by linear encoders within 0.01 mm tolerances.
• SIDDHAPURA / IMPORTED Top and Bottom Tool are long lasting stiffened and provide precise bending.
• ATOS / HAWE servo hydraulic system with proportional valve & Silent high pressure pump.
• All SIDDHAPURA machines are designed using 2D & 3D programming and made with enhanced high tensile 152062 quality steel with the latest high-frequency with  modern aesthetic concept responding hydraulic control technology.
• Front Cylinders design with PU imported Seals.
• Cylinders are machined with 0.001 mm precision and pistons are especially hard chrome.
• Esa / Cybelec delegated 2D & 3D controller with offline software available on request.

Product Details:

Details:

• SIDDHAPURA Front Cylinder Mounted NC Press Brake.
• Pendant & Mobile Control Operating Console with 7″ & 4″ Colour Touch Screen Display HMI with SIDDHAPURA owned User Friendly Programmed X & Y 2 Axis  controller.
• More than 1000* Auto Programs with No. of 50 bends in each programs can be save & All Programs can Display on Screen.
• Siemens/ABB / Schneider / Sulzer/ BCH Switch Gear & Electric Panel Components.
• Centralized Manual Lubrication System.
• Hydraulics from Yuken (Japan) & Polyhydron.
• EN31/EN8 Standard Semi Goose Neck Punch – 1 Nos.
• Multi V Die Block (5 V Die) – 1 Nos.
• Segmented Clamping arrangement.
• Front sheet support

Available:

• Length – 1250 to 8000 mm Capacity – 20 to 1000 Ton

Product Details:

Details:

• SIDDHAPURA Rear Cylinder Mounted NC Press Brake.
• Pendant & Mobile Control Operating Console with 7″ & 4″ Colour Touch Screen Display HMI with SIDDHAPURA owned User Friendly Programmed X & Y 2 Axis  controller.
• More than 1000* Auto Programs with No. of 50 bends in each programs can be save & All Programs can Display on Screen.
• Siemens/ABB / Schneider / Sulzer/ BCH Switch Gear & Electric Panel Components.
• Centralized Manual Lubrication System.
• Hydraulics from Yuken (Japan) & Polyhydron.
• EN31/EN8 Standard Semi Goose Neck Punch – 1 Nos.
• Multi V Die Block (5 V Die) – 1 Nos.
• Segmented Clamping arrangement.
• Front sheet support

Available:

• Length – 1250 to 8000 mm Capacity – 20 to 1000 Ton

Product Details:

Details:

• SIDDHAPURA Rear Cylinder Mounted NC Press Brake.
• Pendant & Mobile Control Operating Console with 7″ & 4″ Colour Touch Screen Display HMI with SIDDHAPURA owned User Friendly Programmed X & Y 2 Axis controller.
• More than 1000* Auto Programs with No. of 50 bends in each programs can be save & All Programs can Display on Screen.
• Siemens/ABB / Schneider / Sulzer/ BCH Switch Gear & Electric Panel Components.
• Centralized Manual Lubrication System.
• Hydraulics from Yuken (Japan) & Polyhydron.
• EN31/EN8 Standard Semi Goose Neck Punch – 1 Nos.
• Multi V Die Block (5 V Die) – 1 Nos.
• Segmented Clamping arrangement.
• Front sheet support

Available:

• Length – 1250 to 8000 mm Capacity – 20 to 1000 Ton