Siddhapura MachineTools
Siddhapura MachineTools
Shapar, Rajkot, Gujarat
GST No. 24AAIFS8177Q1Z9
TrustSEAL Verified
Call 0804895725971% Response Rate
SEND EMAIL

SOS Series Over Crank Shearing Machine

Leading Wholesaler of sos 612 over crank shearing machine, sos 615 over crank shearing machine, sos 620 over crank shearing machine, sos 625 over crank shearing machine, sos 631 over crank shearing machine and sos 815 over crank shearing machine from Rajkot.

SOS 612 Over Crank Shearing Machine

SOS 612 Over Crank Shearing Machine
  • SOS 612 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 11.5 Lakh / PieceGet Latest Price

Product Details:

Table Height x Width770 x 450
Blade (L x W x T)1270 x 75 x 18
Machine (L x W x H)2250 x 1950 x 2300
Main Motor HP / KW7.5 / 5.6
Model NoSOS 612
Cutting Cap MS Length x Thick1270 x 6
Depth of Throat80
Standard Rear Gauge750
Standard Front Gauge600
Stroke Per Minute30
Hold Down to Knife Edge45
Approx. Weight Kgs4500

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 615 Over Crank Shearing Machine

SOS 615 Over Crank Shearing Machine
  • SOS 615 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 11.23 Lakh / PieceGet Latest Price

Product Details:

Depth of Throat80
Standard Rear Gauge750
Blade (L x W x T)1525 x 75 x 18
Machine (L x W x H)2500 x 1950 x 2300
Approx. Weight Kgs5100
Model NoSOS 615
Cutting Cap MS Length x Thick1525 x 6
Standard Front Gauge600
Table Height x Width770 x 450
Stroke Per Minute30
Hold Down to Knife Edge45
Main Motor HP / KW10 / 7.7

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 620 Over Crank Shearing Machine

SOS 620 Over Crank Shearing Machine
  • SOS 620 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 10.5 Lakh / PieceGet Latest Price

Product Details:

Table Height x Width770 x 450
Machine (L x W x H)3000 x 1950 x 2300
Main Motor HP / KW10 / 7.7
Standard Front Gauge600
Standard Rear Gauge750
Blade (L x W x T)2030 x 75 x 18
Stroke Per Minute30
Hold Down to Knife Edge45
Model NoSOS 620
Cutting Cap MS Length x Thick2030 x 6
Depth of Throat80
Approx. Weight Kgs6300

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 625 Over Crank Shearing Machine

SOS 625 Over Crank Shearing Machine
  • SOS 625 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 10.2 Lakh / PieceGet Latest Price

Product Details:

Standard Rear Gauge750
Blade (L x W x T)2540 x 75 x 18
Hold Down to Knife Edge50
Main Motor HP / KW12 / 9.7
Approx. Weight Kgs7200
Standard Front Gauge600
Cutting Cap MS Length x Thick2540 x 6
Depth of Throat80
Table Height x Width770 x 450
Stroke Per Minute30
Machine (L x W x H)3550 x 1950 x 2300
Model NoSOS 625

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 631 Over Crank Shearing Machine

SOS 631 Over Crank Shearing Machine
  • SOS 631 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 9.3 Lakh / PieceGet Latest Price

Product Details:

Model NoSOS 631
Standard Front Gauge600
Standard Rear Gauge750
Table Height x Width770 x 450
Stroke Per Minute30
Machine (L x W x H)4150 x 1950 x 2400
Approx. Weight Kgs9800
Cutting Cap MS Length x Thick3125 x 6
Depth of Throat80
Blade (L x W x T)3125 x 75 x 18
Hold Down to Knife Edge50
Main Motor HP / KW15 / 11.2

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 815 Over Crank Shearing Machine

SOS 815 Over Crank Shearing Machine
  • SOS 815 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 10.2 Lakh / PieceGet Latest Price

Product Details:

Standard Rear Gauge750
Table Height x Width770 x 450
Hold Down to Knife Edge50
Machine (L x W x H)2570 x 1950 x 2300
Main Motor HP / KW12.5 / 9.7
Model NoSOS 815
Cutting Cap MS Length x Thick1525 x 8
Depth of Throat80
Approx. Weight Kgs6500
Standard Front Gauge600
Blade (L x W x T)1525 x 75 x 18
Stroke Per Minute30

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 820 Over Crank Shearing Machine

SOS 820 Over Crank Shearing Machine
  • SOS 820 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 10.5 Lakh / PieceGet Latest Price

Product Details:

Model NoSOS 820
Cutting Cap MS Length x Thick2030 x 8
Depth of Throat80
Table Height x Width800 / 450
Blade (L x W x T)2030 x 75 x 18
Stroke Per Minute25
Machine (L x W x H)3150 x 1951 x 2500
Standard Front Gauge600
Standard Rear Gauge750
Hold Down to Knife Edge50
Main Motor HP / KW12.5 / 9.7
Approx. Weight Kgs7000

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 825 Over Crank Shearing Machine

SOS 825 Over Crank Shearing Machine
  • SOS 825 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 11.23 Lakh / PieceGet Latest Price

Product Details:

Hold Down to Knife Edge50
Approx. Weight Kgs8000
Depth of Throat80
Standard Front Gauge600
Standard Rear Gauge750
Table Height x Width800 / 450
Stroke Per Minute25
Model NoSOS 825
Cutting Cap MS Length x Thick2540 x 8
Blade (L x W x T)2540 x 75 x 18
Machine (L x W x H)3670 x 1950 x 2500
Main Motor HP / KW15 / 11.2

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 831 Over Crank Shearing Machine

SOS 831 Over Crank Shearing Machine
  • SOS 831 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 11.5 Lakh / PieceGet Latest Price

Product Details:

Stroke Per Minute25
Main Motor HP / KW20 / 15
Model NoSOS 831
Cutting Cap MS Length x Thick3125 x 8
Depth of Throat80
Standard Rear Gauge750
Blade (L x W x T)3125 x 75 x 18
Standard Front Gauge600
Table Height x Width800 x 450
Hold Down to Knife Edge50
Machine (L x W x H)4250 x 1950 x 2600
Approx. Weight Kgs11500

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 1020 Over Crank Shearing Machine

SOS 1020 Over Crank Shearing Machine
  • SOS 1020 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 11.8 Lakh / PieceGet Latest Price

Product Details:

Cutting Cap MS Length x Thick2030 x 10
Standard Rear Gauge750
Blade (L x W x T)2030 x 100 x 22
Hold Down to Knife Edge75
Machine (L x W x H)3200 x 1950 x 2600
Approx. Weight Kgs7800
Model NoSOS 1020
Depth of Throat80
Standard Front Gauge600
Table Height x Width800 x 450
Stroke Per Minute25
Main Motor HP / KW15 / 11.2

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 1025 Over Crank Shearing Machine

SOS 1025 Over Crank Shearing Machine
  • SOS 1025 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 8 Lakh / PieceGet Latest Price

Product Details:

Main Motor HP / KW20 / 15
Model NoSOS 1025
Cutting Cap MS Length x Thick2540 x 10
Standard Front Gauge600
Standard Rear Gauge750
Table Height x Width800 x 450
Machine (L x W x H)3700 x 1950 x 2600
Depth of Throat80
Blade (L x W x T)2540 x 100 x 22
Stroke Per Minute25
Hold Down to Knife Edge75
Approx. Weight Kgs9100

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 1031 Over Crank Shearing Machine

SOS 1031 Over Crank Shearing Machine
  • SOS 1031 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 7.5 Lakh / PieceGet Latest Price

Product Details:

Blade (L x W x T)3125 x 100 x 22
Stroke Per Minute25
Hold Down to Knife Edge75
Machine (L x W x H)4300 x 1950 x 2600
Main Motor HP / KW25 / 18.7
Cutting Cap MS Length x Thick3125 x 10
Standard Front Gauge600
Table Height x Width800 x 450
Approx. Weight Kgs9600
Model NoSOS 1031
Depth of Throat80
Standard Rear Gauge750

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 1320 Over Crank Shearing Machine

SOS 1320 Over Crank Shearing Machine
  • SOS 1320 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 6.2 Lakh / PieceGet Latest Price

Product Details:

Machine (L x W x H)3250 x 1950 x 2600
Main Motor HP / KW20 / 15
Model NoSOS 1320
Depth of Throat80
Table Height x Width800 x 450
Stroke Per Minute25
Hold Down to Knife Edge75
Approx. Weight Kgs9250
Cutting Cap MS Length x Thick2030 x 13
Standard Front Gauge600
Standard Rear Gauge750
Blade (L x W x T)2030 x 100 x 25

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 1325 Over Crank Shearing Machine

SOS 1325 Over Crank Shearing Machine
  • SOS 1325 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 5.5 Lakh / PieceGet Latest Price

Product Details:

Blade (L x W x T)2540 x 100 x 25
Stroke Per Minute25
Machine (L x W x H)3750 x 1950 x 2600
Standard Rear Gauge750
Table Height x Width800 x 450
Standard Front Gauge600
Hold Down to Knife Edge75
Main Motor HP / KW25 / 18.7
Approx. Weight Kgs10500
Model NoSOS 1325
Cutting Cap MS Length x Thick2540 x 13
Depth of Throat80

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested

SOS 1331 Over Crank Shearing Machine

SOS 1331 Over Crank Shearing Machine
  • SOS 1331 Over Crank Shearing Machine
Get Best Quote
Approx. Price: Rs 5 Lakh / PieceGet Latest Price

Product Details:

Model NoSOS 1331
Cutting Cap MS Length x Thick3125 x 13
Standard Rear Gauge750
Blade (L x W x T)3125 x 100 x 25
Stroke Per Minute25
Depth of Throat80
Standard Front Gauge600
Table Height x Width800 x 450
Hold Down to Knife Edge75
Machine (L x W x H)4350 x 1950 x 2600
Main Motor HP / KW30 / 22.5
Approx. Weight Kgs13000

Siddhapura Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and responsibility.

Frame: Rigid steel frame of SIDDHAPURA Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout It’s length by accurate machined guide ways ensuring proper clearance and clean cut.
Hold – Down System: Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Knives: SIDDHAPURA Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.Lubrication: All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical Back Gauge: This is a standard equipment provide on all SIDDHAPURA Shears. Scale on the b ack gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard: Fitted in front of hold-down for operator protection without obstructing viewing.

Features:
  • Foot Pedal
  • Fly Wheel & Gear Guard
  • Self Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)


Options:
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Vee-Belts
  • Electric Motor & Starter / Control Panel Board
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring Arm
  • Hydraulic Holddowns Pads (Cam-Pump)
  • All Dimensions are in mm.
  • Power supply 400 / 440 Volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine.
  • All the machines undergo a through check-up by our expert engineers
Request
Callback
Yes! I am Interested
X

Product Videos

Explore More Products

View All Products




Reach Us
Deepak Siddhapura (Director)
Siddhapura MachineTools
Plot No. 1, Survey No. 96/1P, Gundasara Road, Shapar, Taluka Kotda, Sangani
Rajkot - 360024, Gujarat, India
Get Directions


Call Us


Send E-mail